How to flash and Unbrick any MTK device without errors

You need the following before starting the process

1. USB cable 

2. PC with pre-installed MTK drivers

    If you have not installed it yet click here to download and install free

3. Bricked MTK device

4. Sp flashtool

5. The firmware file for your phone.
     Here is how to find the exact firmware for your MTK phone


Now it is simple to flash it
1. extract the firmware
2. extract SP flash tool
3. Open the Flash tool folder and run the flash tool, wait for it to open
4. Click scatter loading and locate the folder of extracted firmware, open and select text file written with this format  MT6xx_Android_scatter, open it and wait for loading files.
5. Click download on Sp flash tool and insert the USB to already turned off phone. Will start with the red line ⇛ pink ⇛ Yellow line till 100% and green tick then disconnect your phone and power it up

How to Find and Download the exact Firmware for any bricked MTK phone

Why do you need to find, download and re-flash the exact firmware as your phone has?
The answer is simple, two phones of the same model number and name can have two different software versions installed based on regions or any other reason. So If you cross-flash these firmware can cause massive damage to your phone and may be leading it to dead mode.

In order to avoid any of the problems above or even wasting your data package on files you wont use here is the simple tricks you can use

First, Try to boot your MTK Device to recovery mode then read the firmware id written on top of the recovery menu and search as it is on your browser

  eg. TECNO-J5__5.1__J5-H801-A1-L-20151103

now compare the search results with your search request and open the link having the same description as your recovery firmware id. download and Flash this firmware

Second, If you can not find the recovery firmware id. You will need to download miracle crack, then open it choose mtk tab read info, take off the battery and reinsert it back and then insert USB without powering on the device. If Miracle crack wont detect your device you will need to download and install MTK drivers

After reading process completes find the id line and search it on your browser to find the firmware.

These methods works 100%

Miracle Box 2.27A Full crack download

Here is your cracked zip.....................download.........................

Instruction
1. Download the zip file above
2. Extract it
3. From the folder open miracle box loader
that's it......................... done


PASSWORD FOR UNZIPPING:   how2flash4n.blogspot.com


IF THE START BUTTON NOT ACTIVE JUST WATCH THIS VIDEO

MIRACLE BOX crack 100% working

How to install MTK VCOM/CDC gadget drivers 100%

How to install CDC gadget drivers.

Make sure you have download the zip file from this link here and extract it.

Open device manager on your PC.

Now Boot your MTK device to meta mode or use your flash tool to boot it to meta mode. If you don't have any of the flash tool to boot your device to meta mode try this here.

Insert your USB connected device while its on meta mode, On your device manager under Ports(COM & LPT)  you will find either MediaTek DA USB VCOM Port with uninstalled drivers (yellow marker) or USB Serial port with clean drivers or yellow marker.

OR

 Now for either two of the above just right click it and choose Update Driver Software ⇒ Browse my computer for driver software ⇒ Let me pick from a list of device drivers on my computer, here scroll down and select Ports (COM&LPT) ⇒ next ⇒ Have Disk... ⇒ Browse, locate the extracted folder you downloaded on above link then choose and open CDC-Driver and folder select cdc-acm. click open then OK ⇨ Next, accept the popup window and wait for the drivers to finish installation.

VOILAH.......................!!!!!

How to install All MTK USB drivers for windows 10, 8.1, 8 and 7

First download MediaTek USB VCOM drivers[how2flash4n].zip and extract it on your desktop or desired folder

Now right click my computer for windows 7&8 user or this PC for windows 10 user then select manage, on the left panel click device manager.

My computer/ This PC ⇨ Manage ⇨ Device manager

Now insert your switched off MTK device while your attention is at the right panel of the device manager, as soon as the PC respond to inserted device the new device on your device manager will popup with yellow marker (mt65xx preloader), right click this device and choose Update driver software.

     

Now select Browse my computer for driver software, locate the folder you extracted at the first stage open MediaTek USB VCOM drivers ⇒ mt65xxx and CDC ⇒ USB VCOM Driver then choose the folder for your respective windows but for windows 7/8/8.1 and 10 chose the last folder then click OK then Next wait for the installation to complete. 

How to install CDC gadget drivers.

Make sure you have downloaded the zip file on the link above.

Open device manager on your PC.

Now Boot your MTK device to meta mode or use your flash tool to boot it to meta mode. If you don't have any of the flash tool to boot your device to meta mode try this here.

Insert your USB connected device while its on meta mode, On your device manager under Ports(COM & LPT)  you will find either MediaTek DA USB VCOM Port with uninstalled drivers (yellow marker) or USB Serial port with clean drivers or yellow marker.

OR

 Now for either two of the above just right click it and choose Update Driver Software ⇒ Browse my computer for driver software ⇒ Let me pick from a list of device drivers on my computer, here scroll down and select Ports (COM&LPT) ⇒ next ⇒ Have Disk... ⇒ Browse, locate the extracted folder you downloaded on above link then choose and open CDC-Driver and folder select cdc-acm. click open then OK ⇨ Next, accept the popup window and wait for the drivers to finish installation.

That's it.................  You have all drivers for MTK 100% working and 100% free.

How to identify the chip set of the phone and install drivers

As we mentioned the types of chip sets we can find among our phones and now is the time you identify them.

You need Windows PC and corresponding USB cable for the phone you are trying to flash

For Windows 10, 8.1, 8. 7, Vista and XP click start and open my computer or you can direct open file manager from desktop and right click (option) at My computer or This Pc

Here hover your mouse to manage as shown above, then select manage. If there will be a popup window which asks you to give a permission to manage your Pc just click yes or other wise wait for it to open.

After the computer management opened now on your left panel click Device manager, make sure you mark any unknown device on your right panel. Unknown devices are those with yellow marker so that when you insert the phone only added marker will stand for your new inserted phone.

Now power off your phone and then insert the USB cable while looking for any new unknown device showing, If it is either MTK, SPD (SCI) or Quallicomm(QHSUB) it will show like one of the following on the phone

Note: the photo above shows the all three chip set phones are inserted at the same time.
If the phone starts to charge remove it and hold volume down while inserting usb and look again, if not shown then remove the phone, disconnect the battery and reinsert it and hold both volume up and volume down while you insert the USB cable and look. You should see one of the above drivers

Voilah...... the chip set identified.
But why does it shows the yellow marker on it? it is because your computer does not have the drivers for your inserted phone so don't panic and follow my next tutorial on how to install phone drivers for flashing

How to Flash Phone By Chip set and Brand

So many brands and Models of phones these days aanh!?
Been wondering how comes these phones can be flashed or repaired using the same computers and the same technicians, should be hell of the job 🙌. What if tell you that is very simple process like counting 1 to 3 😃.

You will only need to know the Chip set and model number(variant) of your phone to deal with it.

There are Millions of brands of phones these days but all are made up of processors and these processors will make your work easy enough if only you can identify what you are dealing with.

These are some of the general chip sets you can find these days in the markets
Kirin, Mediatek(MTK), Snapdragon(SPD), Exynos, RDA, Coolsand, Qualicomm, ARM Mali, Nvidia and many others.

How to identify the chip set of the phone and install drivers

Flashing by referring the chipset inside the phone needs to have tool special built to accept the drivers of the respect chip set. For example, You have mtk based device means you need MTK based flashtool or box to deal with it and the same for every other chip set. BUT some of phones have their flashtools by their specific brand like Lg, Asus, Samsung, Nokia, Iphones, Xiami (MI) and others which their flashtool can be found.

Now you get the picture on how single technician can deal with millions of brands of phones.

Click on the links below for free tutorial on..

How to Flash any MTK phone
How to flash  any Spd phone
How to flash any RDA or Coolsand phone
How to flash any spd phone
How to flash any Qualicomm phone
How to flash any Sasmung phone
How to flash any iPhone
How to Flash any iPad
How to flash any iPod
How to flash any Lg phone